Blog Archives

Raven 155 is a waterborne epoxy used to reduce water vapour transmission and seal green concrete surfaces prior to topcoat application. It is a two-component waterborne epoxy with ultra-low viscosity. Use as a penetrating primer/sealer for new and existing concrete and as a polymer additive with high-early strength repair mortars.

Raven 755 is designed as a reinforced, trowel or spray applied high early strength underlayment/repair material. Raven 755 can be a stand-alone product or top coated with Raven products after 24 hours. Raven® 755 is typically used on surfaces where rehabilitation of an existing structure requires enhancement of the structural integrity and where exposure to…

Raven® 705CA is a reinforced calcium aluminate cementitious product for use on concrete and masonry structures as a repair mortar. Designed as a reinforced stand-alone product or as an underlayment for Raven coatings, 705CA’s properties allow it to be efficiently spray applied to rehabilitate substrates providing a suitable surface for the application of a polymer…

Raven 581 is a 100% solids, no VOC, modified polyurethane designed for use as a maintenance hole/ manhole “chimney seal.” It can be applied in high humidity conditions with minimal bubbling and loss of adhesion. It adheres well to properly prepared concrete, steel, aluminium, wood, composites, and many other substrates. Some substrates exhibit much better…

Raven® 580 is a 100% solids “pure” polyurea adhesive designed as a patch kit for polyurea coatings. Raven 580 can be used in high humidity conditions with minimal bubbling and loss of adhesion. Raven 580 adheres very well to previously sprayed and properly prepared polyurea. In some cases, it may be necessary to use Raven…

Raven 520 is a two-part, high solids, UV-Stable, Polyaspartic coating. Raven 520 was designed for use in highly sensitive applications that require minimal odour and maximum protection. Raven 520 adheres very well to properly prepared concrete, steel, aluminium, wood, composites, and many other substrates. Raven 520 can be “rolled” or “sprayed”. It displays excellent “hot…

Raven 410 HCR is a solvent-free 100% solids, ultra-high build “novolac” epoxy coating formulated with excellent physical strengths and excellent chemical resistance. Raven 410 HCR exhibits superior adhesion to concrete, steel, masonry, fibreglass and other surfaces. Designed for continuous operating temperatures up to 140°F in 98% sulfuric acid solution, 410’s unique ultra-high-build ability allows it…

Raven® 405 Trowel is a solvent-free 100% solids, ultra- high build epoxy coating formulated for longer pot life and trowel application. 405 Trowel’s high-build ability allows it to be applied on vertical and overhead surfaces. The surface tolerance of 405 Trowel allows it to be used as a structural lining in manholes, tanks and other…

Raven® 405 Ultra-Fast Set (UFS) is a solvent-free 100% solids, high build epoxy formulated for coating manhole inverts and benches. Designed for contractors and municipalities to minimize downtime, Raven 405 UFS will typically allow lateral flow to the invert area of a manhole in 15 minutes after application. Raven 405 UFS high-build ability allows it…

Raven® 405 is a 100% solids, ultra-high build, solvent-free epoxy coating formulated with exceptionally high physical properties and chemical resistance. 405 exhibits a superior bond to dry and damp concrete, masonry, steel, ductile iron and fibreglass and is specifically designed as a corrosion protection and structural enhancement lining system which can be used on and…