Blog Archives
ELASTAFLEX™ HP UB
ELASTAFLEX™ HP UB is a unique blend of aliphatic and aromatic polymer chemistry with greater color/gloss retention and is more UV resistant than aromatic polyureas*. ELASTAFLEX™ HP UB is a very economical polyurea which exhibits very high tensile strength and elongation. ELASTAFLEX™ HP UB was stretched to twice the samples original length at 30 times…
Read More
HARD CAP-100™
HARD CAP-100™ is a 100% solids (0 VOCs) 1:1 ratio plural aliphatic polyurea. It is available in White and several standard colors,* as well as clear. HARD CAP-100™ is an ideal choice when a durable high build coating for interior or exterior applications with excellent color stability and gloss retention is required. HARD CAP-100™ provides…
Read MoreELASTAFLEX™ HP
ELASTAFLEX™ HP is a unique blend of aliphatic and aromatic polymer chemistry with greater color/gloss retention and is more UV resistant than aromatic polyureas*. ELASTAFLEX™ HP is a very economical polyurea which exhibits very high tensile strength and elongation. ELASTAFLEX™ HP was stretched to twice the samples original length at 30 times per minute, more…
Read More HM-VK™
HM-VK™ is a hand-mixed polyurea elastomer that exhibits ultra-high strength. SPI designed this product to benefit the blast and ballistic avenues because of its extremely high tensile strength and elongation value. It also can repair polyurea than has been damaged during service or to fill in large voids of concrete before applying polyurea. Because it’s…
Read MoreELASTAFLEX™ III
ELASTAFLEX™ III is a third generation pure polyurea waterproofing elastomer. This economical polymer exhibits high tensile strength and very high elongation (>900%), to bridge stress cracks in concrete and other substrates. It contains no tar, asphalt, or VOCs. It can be walked on in minutes and is usually back-filled in less than one hour. ELASTAFLEX™…
Read More K5 HI-TEMP™
K5 HI-TEMP™ is a high-strength, abrasion resistant polyurea, developed as a resilient polymer to withstand higher contact temperature than conventional polyurea elastomers. K5 HI-TEMPTM can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectively applied to high-wear areas.
Read MorePOLYSHIELD HT™ SL UB
POLYSHIELD HT™ SL UB is a fast-set, high-performance, spray-applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides a flexible, tough, resilient monolithic membrane with good water and chemical resistance. Unlike most spray-applied polyureas, POLYSHIELD HT™ SL UB is available with SPI’s cutting-edge ULTRA BOND™…
Read More K5-UB™
K5-UB™ is an ultra high-strength, high-elongation polyurea, originally developed as a resilient blast resistant polymer. Soon after, it was discovered that K5-UB™ is exceptionally resistant to abrasion, compared to other spray applied coatings. K5-UB™ adheres to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation. K5-UB™ can…
Read MorePOLYSHIELD HT™ TRAFFIC COAT
POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance.
Read More K5™
K5™ is an ultra high-strength, high-elongation polyurea, originally developed as a resilient blast resistant polymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion, compared to other spray applied coatings. K5™ can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectively applied to high wear…
Read MoreEPL™ 25 UB 1
EPL™25 UB is a slow set, self-leveling elastomer. EPL™25 UB is formulated with SPI’s cutting-edge ULTRA BOND™ technology. SPI’s advanced ULTRA BOND™ chemistry is coined “the duct tape molecule”. ULTRA BOND™ has the unique advantage of adhering to most properly prepared organic and inorganic (new and aged) surfaces without requiring a primer. Like duct tape,…
Read More LMX-UB™
LMX-UB™ is an economical polymer that exhibits low tensile strength and very high elongation (>700%) while providing a tenacious bond to certain thermoset plastic surfaces. Adheres to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation. LMX-UB™ was stretched and relaxed at 30 pulls per minute, double…
Read MorePOLYSHIELD SIPP™ 122
POLYSHIELD SIPP™ 122 is a high flexural modulus, thermoset spray-applied, plural-component, pure polyurea elastomer with ANSI/NSF 61 approval. This product is an economical polyurea that exhibits superior rigidity, and high impact resistance. It forms a seamless, monolithic membrane with good water and chemical resistance.
Read More POLYSHIELD HT-100F UB
POLYSHIELD HT-100F UB™ is a high tensile, high elongation, high build, fast-set, elastomer, specifically formulated to provide a tenacious bond to certain thermoset plastic surfaces. Unlike most spray-applied polyureas, POLYSHIELD HT-100F UB™ has the unique advantage of adhering to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface…
Read More
Adalline 400™
Adalline 400 is specially designed to be hydrocarbon resistant, releasing no hydrocarbons, even when hammered. The class-leading tank and bund polyurea coating is capable of giving any material structural integrity and providing a waterproof, chemical barrier that’s highly flexible and strong. Adalline 400™ is only available through SPI Performance Coatings. Key benefits of using Adalline…
Read More AMP-100™
AMP-100™ spray-applied, plural-component polyurea, is a unique synergy of aliphatic and aromatic polymer chemistry. AMP-100™ pure polyurea is formulated using amine terminated polyether resins, amine chain extenders, and aliphatic and aromatic prepolymers. For many applications this highly cross-linked elastomer offers an economical alternative to pure aliphatic protective coatings. AMP-100™ can be used as a stand-alone…
Read More POLYSHIELD HT-SL™
POLYSHIELD HT- SL™ is a fast-set, high-performance, spray- applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides a flexible, tough, resilient monolithic membrane with good water and chemical resistance.
Read More
AQUASEAL HI-RISE X3™
AQUASEAL HI-RISE X3™(X3™) is a unique elastomer that expands approximately 300% of its original volume during the spray application. In place yield is ±50 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™ gun. As X3™ rises, it bridges substrate imperfections to virtually eliminate blowholes and pinholes when applied…
Read More PTU-AR™
PTU-AR™ is the newest product in the PTU chemistry group. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU-AR™ can be sprayed to any thickness in one application and returned to service in a matter of hours. It is resistant to many acids, alkalines, and caustics in immersion…
Read More
AQUASEAL HI-RISE X5™
AQUASEAL HI-RISE X5™(X5™) is a unique elastomer that expands approximately 500% of its original volume during the spray application. The resulting foam is soft, yet tough, with excellent memory retention. The in place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a LPGTM LOCK N LOAD™ gun. As X5™ expands,…
Read More PTU™
PTU™ is a new generation of high-performance polyurea coating and is the result of six years of development and field testing. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application and returned to service in a matter of hours.
Read More
AQUASEAL™
AQUASEAL™ is a state-of-the-art, high performance, spray applied plural-component pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance.
Read More Staingard 6000™
STAINGARD 6000™ is a 100% solids by volume, aliphatic polyaspartic coating, two component, liquid applied, environmentally friendly surface topcoat for waterproofing membrane systems, with a citrus odor. STAINGARD 6000™ is quick curing and specifically formulated to be installed in thin film applications.
Read More DRAGONSHIELD-BC™
DRAGONSHIELD-BC™ polyurea represents a breakthrough in plural-component spray applied polymer technology. This ultra high-strength polymer was developed specifically for blast mitigation and fragment/spall containment. *Tests conducted on DRAGONSHIELD-BC™ protected surfaces compared to unprotected surfaces document that DRAGONSHIELD-BC™ will significantly reduce damage caused by blast effects. Properties include: Ultra high tensile strength Moderate elongation Superior tensile…
Read More Staingard 6072™
STAINGARD 6072™ is a 72% solids by volume, aliphatic polyaspartic coating, two component, liquid applied, environmentally friendly surface topcoat for waterproofing membrane systems, with a citrus odor. STAINGARD 6072™ is quick curing and specifically formulated to be installed in thin film applications.
Read More DRAGONSHIELD-HT® ERC
DRAGONSHIELD-HT® ERC is a state-of-the-art, high-performance, sprayed, plural-component pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance.
Read More
AMP™ 100 UB
AMP™ 100 UB spray-applied, plural-component polyurea is a unique synergy of aliphatic and aromatic polymer chemistry. AMP™ 100 UB pure polyurea is formulated using amine terminated polyether resins, amine chain extenders, and aliphatic and aromatic prepolymers. For many applications this highly cross-linked elastomer offers an economical alternative to pure aliphatic protective coatings. AMP™ 100 UB…
Read More EPL – 1.5™
EPL-1.5™ is a high-strength, self-leveling, semi-rigid polyurea elastomer. Due to its high tensile strength, tear strength, and tensile modulus, EPL-1.5™ is very resistant to deformation with over 400% elongation. This optimal balance of physical properties makes EPL- 1.5™ an ideal choice of polymers for filling or repairing construction joints, random cracks, joint faces, and spalls….
Read More
DragonShield-HT® UB ERC
DragonShield-HT® UB ERC is a state-of-the-art, high-performance, sprayed, plural-component pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. DragonShield-HT® UB ERC has the unique advantage of adhering to many polymeric substrates.
Read More
DragonShield™ BC UB
DragonShield™ BC UB represents a breakthrough in plural-component spray applied polymer technology. This ultra high-strength polymer solution was developed specifically for blast mitigation and fragment/spall containment and protection. Tests conducted on DragonShield™ BC UB protected surfaces compared to unprotected surfaces document that DragonShield™ BC UB will significantly reduce damage caused by blast effects. Unlike most…
Read MoreFind your solution
We offer high performance coatings and professional coating products and solutions for the industrial market.
View all of our products